!
!
web drills tiles etc
TILE, GLASS, CERAMIC AND PORCELAIN DRILLS/BITS/WHEELS
!

TILE & GLASS DRILL BIT 3MM

DRAPER
31498

Draper Expert 31498 - Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

TILE & GLASS DRILL BIT 4MM

DRAPER
31503

Draper Expert 31503 - Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

TILE & GLASS DRILL BIT 5MM

DRAPER
31507

Draper Expert 31507 - Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

TILE & GLASS DRILL BIT 6MM

DRAPER
31508

Draper Expert 31508 - Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

TILE & GLASS DRILL BIT 7MM

DRAPER
31509

Draper Expert 31509 - Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

TILE & GLASS DRILL BIT 8MM

DRAPER
31510

Draper Expert 31510 -  8mm Tile & Glass Drill Bit - for use on glass, mirrors, floor tiles and quarry tiles.

Fully ground profile tip for clean entry.  Always use variable speed drill which is not in hammer action mode, drill at slow speed, applying light pressure.  Drill bit is most effective when water is used around the area to be drilled.  This drill bit must not be used on toughened glass.

6.5MM RUBI DRILL BIT CERAMIC, GRANITE , LIMESTONE

RUBI
04920
RUBI 6.5mm Diamond drill bit to be used with electric drill without hammer.
The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces.

Average life between 5 and 10 holes depending on the material.
Body made of steel and bit made of electrodeposited diamond.
Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.
Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled.
To achieve a better finish and a longer life of the drill bit, it's important to observe the adequate speed of use and to apply a moderate pressure during the drilling.

8.0MM RUBI DRILL BIT CERAMIC, GRANITE , LIMESTONE

RUBI
04923
RUBI 8.0mm Diamond drill bit to be used with electric drill without hammer.
The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces.

Average life between 5 and 10 holes depending on the material.
Body made of steel and bit made of electrodeposited diamond.
Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.
Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled.
To achieve a better finish and a longer life of the drill bit, it's important to observe the adequate speed of use and to apply a moderate pressure during the drilling.

10.0MM RUBI DRILL BIT CERAMIC, GRANITE , LIMESTONE

RUBI
04924
RUBI 10.0mm Diamond drill bit to be used with electric drill without hammer.
The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces.

Average life between 5 and 10 holes depending on the material.
Body made of steel and bit made of electrodeposited diamond.
Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.
Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled.
To achieve a better finish and a longer life of the drill bit, it's important to observe the adequate speed of use and to apply a moderate pressure during the drilling.

DRILL PORCELAIN 6mm

LEMAN FRANCE
611.100.06

6MM x 100 PORCELAIN DRILL

Water to be applied to the area to be drilled and to be used with an power drill with hammer action switched off.